dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - PCM Replacement/Software Update|Page 2279 > < Exhaust System|Removal|Page 2267
Page 1
background image

Technical Service Bulletin # H33

Date: 081106

Recall - PCM Replacement/Software Update

November 2008

Dealer Service Instructions for:

Safety Recall H33
Powertrain Control Module

Models

2009 (PM) Dodge Caliber

(MK) Jeep(R) Compass and Patriot

(JS) Chrysler Sebring and Dodge Avenger

(JC) Dodge Journey

NOTE

This recall applies only to the above vehicles built from July 10, 2008 through August 26, 2008 (MDH 071011 through 082606).

IMPORTANT

Some of the involved vehicles may be in dealer new vehicle inventory. Federal law requires you to complete this recall service on these vehicles
before retail delivery. Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in
for service. Involved vehicles can be determined by using the VIP inquiry process.

Subject

The Powertrain Control Module (PCM) on about 680 of the above vehicles may have been manufactured with an adhesive that could cause the printed
circuit board to break. This can cause the engine to stall and result in a crash without warning.

Repair

The PCM must be replaced and the correct software programmed into the new module.

Parts Information

Special Tools

Recall - PCM Replacement/Software Update|Page 2279 > < Exhaust System|Removal|Page 2267