Avenger L4-2.4L (2009)
NOTE: There is a small wire harness in the steering wheel and it contains the horn circuits and speed control circuits.
6. Connect the speed control and horn wire connector into the clockspring.
7. Pull the grenade pin out of the clockspring.
8. Install the driver airbag, See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Installation
WARNING: Do not connect the negative battery cable at this time. Perform the Air Bag System Test prior to connecting the negative battery
cable See: Restraint Systems/Testing and Inspection . Failure to follow this warning may result in accidental air bag deployment and
possible serious or fatal injury.
