Avenger L4-2.4L (2009)
3. Install the mounting bolt (4) and nut (1) fastening the shock assembly (2) to the lower control arm (3). Do not tighten at this time.
NOTE: When attaching a stabilizer bar link to the lower control arm it is important that the lower mounting stud be positioned properly. The
lower mounting stud on the right side link needs to point toward the front of the vehicle when inserted through the lower control arm
mounting flange. The left side link lower stud needs to point toward the rear of the vehicle. Otherwise the suspension geometry will
not function properly.
4. If equipped, attach the stabilizer bar link (2) to the lower control arm (4). Install the nut (3) and while holding the stabilizer bar link lower stud
stationary, tighten the nut (2) to 48 Nm (35 ft. lbs.).
5. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
