Avenger L4-2.4L (2009)
11. Inspect the shock assembly components for the following and replace as necessary:
-
Inspect the shock absorber (damper) (13) for shaft binding over the full stroke of the shaft.
-
Inspect the jounce bumper (8) for cracks and signs of deterioration.
-
Inspect the dust shield (9) for cracks and tears.
-
Check the upper mounting bracket (4) for cracks and distortion and its retaining studs for any sign of damage.
-
Inspect the upper (3) and lower (6) bushings for material deterioration and signs of deterioration. Inspect the sleeve (5) for wear and distortion.
-
Inspect the upper (10) and lower (12) spring isolators for material deterioration and distortion.
-
Inspect the coil spring (11) for any sign of damage to the coating.
NOTE: For reassembly, See: Suspension Strut / Shock Absorber/Service and Repair/Overhaul/Rear Suspension