Avenger L4-2.4L (2009)
4. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly.
5. Remove the lower shock mounting nut (1) and bolt (4).
6. Lower the shock assembly (2) out of the body bracket and lift out over rear suspension.
Rear Shock Absorber, Coil-Over - Installation
INSTALLATION
NOTE: When installing the shock assembly into the body bracket in the following step, be sure to position the upper mounting bracket so that
the angular formed side (as viewed from above) of the mounting bracket flange (1) is facing outboard of vehicle (opposite side of