Avenger V6-2.5L VIN N (1998)
CAUTION: Do not use a flat-tipped screwdriver or other tool to prevent damage to inner cylinder.
4. Clean piston surface and inner cylinder with trichloro-ethylene, alcohol, or specified brake fluid.
Specified brake fluid: MOPAR Brake Fluid/Conforming to DOT 3 or DOT 4.
CAUTION:
a. When the limit is exceeded, the brake pads on both the left and right wheels must be replaced as a set.
b. If there is a significant difference in the thicknesses of the pads on the left and right sides, check the sliding condition of the piston, lock pin
and guide pin.
INSPECTION
Visual Inspection
-
Check cylinder for wear, damage or rust.
-
Check piston surface for wear, damage or rust.
-
Check caliper body or sleeve for wear.
-
Check pad for damage or adhesion of grease, check backing metal for damage.
Pad Wear Check
Measure thickness at the thinnest and most worn area of the pad. Replace pad assembly when pad thickness is less than the limit value.
INSTALLATION
1. Reverse disassembly procedure for installation.
2. Install the guide pin and lock pin as illustrated so that each head mark of the guide pin and the lock pin matches the indication mark located on the
caliper body.
