Avenger V6-2.5L VIN N (1998)
Fuel Pump Relay: Testing and Inspection
MFI RELAY (ASD RELAY) AND FUEL PUMP RELAY CHECK
1. Remove the relay.
2. Check that there is continuity between (4) and (6) terminals.
-
Standard value: 35 - 75 ohms
3. Use jumper leads to connect relay terminal No. 6 to the battery (+) terminal and terminal No. 4 to the battery (-) terminal.
-
Check the continuity between relay terminal No. 2 - 8 while connecting and disconnecting the jumper lead at the battery (-) terminal.
Jumper lead
Continuity between terminals No. 2 - 8
Connected
Continuity (0 ohms)
Disconnected
No continuity (infinite ohms)
4. If there is a defect, replace the MFI (ASD) relay or fuel pump relay.