Avenger V6-2.5L VIN N (1998)
Control Arm: Mechanical Specifications
FRONT:
Upper Arm:
Shaft Assemblies Through Bolt/Nut ..................................................................................................................................................... 57 Nm (41 ft. lbs.)
Shaft Assemblies Self-Locking Nuts .................................................................................................................................................... 86 Nm (62 ft. lbs.)
Lower Arms:
Lateral Arm Bolt/Nut ........................................................................................................................................................... 98 - 118 Nm (71 - 85 ft. lbs.)
Compression Arm Bolts ........................................................................................................................................................................ 83 Nm (60 ft. lbs.)
REAR:
Upper Arm:
General Specifications:
Dimension For Positioning Bracket ............................................................................................................................ 37.2 ±2 mm (1.46 ± 0.08 inch)
Tightening Specifications:
Mounting Bracket Attaching Bolts ................................................................................................................................................. 39 Nm (28 ft. lbs.)
Mounting Bracket To Arm Pivot Bolts/Nuts .................................................................................................................................. 57 Nm (41 ft. lbs.)
Arm To Knuckle Pivot Bolt/Nut .................................................................................................................................................. 98 Nm (71 ft. lbs.) *
Lower Arm And Toe Control Arm Assemblies:
Lower Arm Pivot Bolts/Nuts ............................................................................................................................................................. 98 Nm (71 ft. lbs.) *
Toe Control Arm Pivot Bolts/Nuts ...................................................................................................................................... 69 - 78 Nm (50 - 56 ft. lbs.) *
* Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
