Avenger V6-2.7L (2008)
Remote Switch: Description and Operation
DESCRIPTION
Remote radio control switches are rocker-type switch units are mounted in the upper spoke covers of the rear (instrument panel side) steering wheel trim
cover. The switch unit on the left side is the seek switch and has seek up, seek down, and preset station advance switch functions. The switch unit on the
right side is the volume control switch and has volume up, volume down, and mode advance switch functions.
The two remote radio switch units are each retained in a mounting hole located on opposite sides of the rear steering wheel trim cover by four integral
snap features. A plastic bracket on the back of each switch unit provides additional support for the unit by extending towards the center of the steering
wheel where it is clamped between the steering wheel armature and the steering wheel rear trim cover mounting boss by the trim cover mounting screw.
The two remote radio switch units share a common steering wheel wire harness with the vehicle speed control switches. The steering wheel wire harness
is connected to the instrument panel wire harness through the clockspring.
