Avenger V6-2.7L (2008)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper Reinforcement - Removal
REMOVAL
1. Remove rear fascia See: Rear Bumper Cover / Fascia/Service and Repair/Rear Fascia - Removal.
2. Support bumper reinforcement (2) on a suitable lifting device.
3. Mark position of nuts (1) on frame rail to aid in installation.
4. Remove license plate connector push pin from rear bumper reinforcement.
5. Remove nuts (1) attaching rear bumper reinforcement (2) to frame rail.
6. Remove bumper reinforcement (2) from vehicle.
