Avenger V6-2.7L (2008)
10.
Verify that the door latch cable is snapped into the cable retainer clip and then install the door trim panel to the door (Figure 4).
11.
Install the two pull cup retaining screws (Figure 1).
12.
Install the door pull cup screw cover (Figure 1).
13.
Install the interior door release handle retaining screw (Figure 1).
14.
Install the interior door release handle screw cover (Figure 1).
15.
Install the side view mirror flag bezel.
16.
Repeat Steps 1 through 15 of this procedure on the passenger side front door.