Avenger V6-2.7L (2008)
1. Place A-pillar trim into position.
2. Slide tether downward through housing (1) until clip engages (2).
3. Firmly seat A-pillar trim into position.
Removal
REMOVAL
1. Remove sill trim panel.See: Scuff Plate/Service and Repair/Door Sill Scuff Plate - Removal
2. Remove seat belt anchor (3). See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor
3. Using trim stick C-4755, remove SRS airbag cover located at top of B-pillar.