Avenger V6-2.7L (2008)
2. Slide tether downward through housing (1) until clip engages (2).
3. Firmly seat A-pillar trim into position.
Removal
REMOVAL
1. Remove sill trim panel.See: Scuff Plate/Service and Repair/Door Sill Scuff Plate - Removal
2. Remove seat belt anchor (3). See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor
3. Using trim stick C-4755, remove SRS airbag cover located at top of B-pillar.
4. Move seat belt adjuster all the way down exposing the B-pillar screw. Remove B-pillar screw.
5. Using trim stick C-4755, pry up B-pillar and route seat belt through B-pillar trim. Remove B-pillar bottom (2) first and remove trim from B-pillar.
Installation
INSTALLATION
