Avenger V6-2.7L (2008)
Sunroof / Moonroof Motor: Removal and Replacement
Sunroof Motor With Control Unit - Removal
REMOVAL
1. Remove headliner. See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Removal
2. Disconnect the electrical connector (1).
3. Remove three motor assembly attaching screws (4) from bottom side of motor assembly (3) and remove motor assembly from the motor bracket.
Sunroof Motor With Control Unit - Installation
INSTALLATION
1. If sunroof was open when drive motor was removed, carefully move glass panel into closed position and remove glass panel. See: Sunroof /
Moonroof Panel/Service and Repair/Removal
2. Set lifter arm timing by manually sliding the mechanisms (1) in the track until timing holes in the trollies are aligned with the timing holes in the
lifter arm cams (2) and insert pins (3) into the mechanisms to hold mechanisms in closed position.