Avenger V6-2.7L (2008)
Seat Cushion: Service and Repair
Seat Cushion Side Shields - Installation
INSTALLATION
1. Transfer seat switches, if equipped.
2. Connect switch wire connectors to cushion side shield, if equipped.
3. Place shield in position on seat cushion.
4. Install screw attaching seat cushion side shield.
5. Install seat belt (2), seat belt anchor bolt (3), and side cover (4). Tighten seat belt anchor bolt to 40 Nm (30 ft. lbs.).
6. Install recliner handle.See: Service and Repair/Seat Handles/Installation
7. Install seat into vehicle. See: Service and Repair/Seat - Installation.