dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Interior - Seat Track Creak/Squeak Sound|Page 11779 > < Heated Seat Switch - Removal|Page 11770
Page 1
background image

Seat Track: Customer Interest
Interior - Seat Track Creak/Squeak Sound

NUMBER: 23-008-08

GROUP: Body

DATE: February 15, 2008

SUBJECT:
Seat Track Creak/Squeak Sound

OVERVIEW:
This bulletin involves inspecting the seat track for metal to metal contact. The stationary track may have a rolled in rear corner causing interference. If
this corner is contacting movable track, track adjustment is necessary.

MODELS:

2007 - 2008

(JS41)

Sebring/Avenger

2007 - 2008

(PM)

Caliber

2007 - 2008

(MK)

Compass/Patriot

NOTE

This bulletin applies to models built before December 7, 2007 (MDH1207XX).

SYMPTOM/CONDITION:
Some vehicle occupants may experience a creak or squeak sound while driving with seat stationary and occupied.

DIAGNOSIS:

If the customer experiences the Symptom/Condition, inspect the seat track:

1.

Move the affected seat to the full rear position.

2.

Inspect the movable portion of the inner seat track lip for metal to metal contact (witness mark) with the stationary portion at the rear edge. Is there
a witness mark indicating metal to metal contact between stationary and movable seat track? (Fig. 1).

Interior - Seat Track Creak/Squeak Sound|Page 11779 > < Heated Seat Switch - Removal|Page 11770