Avenger V6-2.7L (2008)
Cowl Moulding / Trim: Service and Repair
Removal
REMOVAL
1. Release hood latch and open hood.
2. Remove windshield wiper armsSee: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arms - Removal.
3. Remove push pins (3) attaching cowl cover to cowl.
4. Remove the seal, cowl screen to hood inner panel (2).
5. Remove clips attaching cowl cover to cowl plenum under hood to cowl bulb seal.
6. Remove cowl cover (1) from vehicle.