Avenger V6-2.7L (2008)
10. Unclip the wheel speed sensor head (1) from the spring-loaded retainer on the rear of the hub and bearing (2). Remove the sensor from the vehicle.
FWD
FRONT-WHEEL-DRIVE
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Move aside the luggage compartment carpet as necessary to access the wheel speed sensor cable connector.
2. Disconnect the wheel speed sensor cable connector (1) at the body wiring harness connector (2).
3. Raise and support the vehicle. See: Maintenance.