Avenger V6-2.7L (2008)
Brake Pad: Removal and Replacement
Front
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Raise and support the vehicle. See: Maintenance
NOTE: Perform STEP 2 through STEP 5 on each side of the vehicle to complete pad set removal.
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: When removing the caliper guide pin bolts (2, 3) note that one (upper) has a special sleeve on the end. It is important that this bolt be
installed in the upper mounting hole when the caliper is installed.