Avenger V6-2.7L (2008)
8. Disconnect the ABM harness connector from the Antilock Brake Module (ABM). To do so:
a. Depress the tabs on each side of the connector cover, then
b. Pull outward and upward on the lower half of the cover until it locks into position pointing straight outward (2). The connector can then be
pulled straight outward off the ABM (1).
9. Loosen, but do not remove, the two mounting screws (2) attaching the ICU (1) mounting bracket to the body.
10. Lift the ICU and mounting bracket (1) off the mounting screws (2).
