Avenger V6-2.7L (2008)
NOTE: Cylinder head cover attaching bolts are captured to the cover.
CAUTION: Make certain the double ended studs in the center of the cylinder head cover are loose before attempting to remove cover.
9. Remove the left cylinder head cover (1).
Right
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect electrical connectors from ignition coils and capacitor.
3. Disconnect right engine harness retaining clips (2) from cylinder head cover studs. Position the engine harness (6) aside.
4. Disconnect the PCV hose (5) from the upper intake manifold.
5. Remove upper intake manifold See: Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Removal.