Avenger V6-2.7L (2008)
Valve Cover: Service and Repair
Cylinder Head Cover - Installation
Left
INSTALLATION
1. Clean cylinder head cover and both sealing surfaces. Inspect and replace gaskets (1) as necessary.
2. Install cylinder head cover and hand start all fasteners. Verify that all double-ended studs are in the correct locations (1).
3. Tighten cylinder head cover attaching bolts and double-ended studs to 12 Nm (105 in. lbs.).
4. Reposition the left engine harness (3), and install the left engine harness retainers (1) to the double-ended studs.
5. Install the ignition coils.
