Avenger V6-2.7L (2008)
NOTE: When camshaft sprocket bolts are removed, the camshafts will rotate in a clockwise direction.
10. Starting with the right camshaft sprocket, remove the sprocket attaching bolts. Remove camshaft damper (if equipped) and sprocket.
11. Remove left side camshaft sprocket attaching bolts and remove sprocket.
12. Remove lower chain guide (7) and tensioner arm (8).
13. Remove the primary timing chain.
14. For removal of crankshaft sprocket, See: Cylinder Block Assembly/Crankshaft/Service and Repair/Removal and Replacement/Crankshaft -
Removal.
Crankshaft Sprocket
REMOVAL - CRANKSHAFT SPROCKET
1. Remove primary timing chain. See:
CAUTION: Use care not to turn crankshaft while removing crankshaft sprocket, as damage to valves and or pistons could occur.
2. Remove crankshaft sprocket by first installing the crankshaft damper bolt. Apply grease or equivalent to damper bolt head and position Special
Tools 5048-1, 5048-6, and 8539 (1) on sprocket and crankshaft nose. Remove sprocket using care not to rotate the crankshaft.
