Avenger V6-2.7L (2008)
7. Remove AC/Generator belt tensioner/bracket assembly.
8. Disconnect heater hose from tube at right front frame rail area.
9. Remove screws securing heater supply tube to right frame rail. Reposition heater supply tube.
10. Place a floor jack with wooden block under oil pan to support engine.
11. Remove right engine mount.
12. Remove upper timing chain cover bolts.
13. Remove remaining bolts securing timing chain cover to engine.
14. Remove timing chain cover.
15. Discard timing chain cover gasket (1). Remove front crankshaft oil seal from cover.
