dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Air Door, HVAC > < Accumulator HVAC|Removal|Page 9240
Page 2
background image

7. Reposition the front of the right front wheel house splash shield (3) to the body (4) and install the three push-pin retainers (1) and the three screws

(2). Tighten the screws securely.

8. Install the right front wheel See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
9. Lower the vehicle.

10. Reconnect the negative battery cable.

CAUTION: Do NOT run the engine with a vacuum pump in operation or with a vacuum present within the A/C system. Failure to follow
this caution will result in serious A/C compressor damage.

11. Evacuate the refrigerant system See: Service and Repair/Procedures/Refrigerant System Evacuate.
12. If the A/C accumulator is being replaced, add 30 milliliters (1.0 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple

A/C system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system See:
Service and Repair/Procedures/Refrigerant Oil Level. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.

13. Charge the refrigerant system See: Service and Repair/Procedures/Refrigerant System Charge.

Air Door, HVAC > < Accumulator HVAC|Removal|Page 9240