Avenger V6-2.7L (2008)
NOTE: Illustration shown with instrument panel removed for clarity.
1. On LHD models, remove the glove box bin See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument
Panel Glove Box - Removal.
2. Disconnect the right floor duct (1) from the right side of the HVAC housing (2) and remove the duct.
LEFT FRONT FLOOR DUCT
NOTE: Illustration shown with instrument panel removed for clarity.
3. On RHD models, remove the glove box bin See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument
Panel Glove Box - Removal.
4. On LHD models, disconnect the shift interlock cable (3) from the left floor duct (1) and position the cable out of the way.
5. Remove the screw (4) that secures the left floor duct to the left side of the HVAC housing (2).
6. Disconnect the left floor duct from the HVAC housing and remove the duct.
REAR FLOOR DISTRIBUTION DUCTS
