Avenger V6-2.7L (2008)
Housing Assembly HVAC: Overhaul
Air Distribution Housing
HOUSING-AIR DISTRIBUTION
NOTE: The air distribution housing must be removed from the HVAC housing and disassembled for service of the blend-air and mode-air
doors.
NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.
1. Remove the HVAC housing assembly and place it on a workbench See: Removal and Replacement/HVAC Housing - Removal.
2. Remove the air distribution housing (2) from the HVAC housing (1) See: Removal and Replacement/HVAC Housing - Removal.
3. If equipped with the 2.0L diesel engine, remove the electric positive temperature coefficient (PTC) heater unit from the air distribution housing .
4. Remove the heater core from the air distribution housing See: Heater Core/Service and Repair/Removal.
5. Remove the screws (1) that secure the blend door actuator (2) to the left side of the air distribution housing (3) and remove the actuator.
