Avenger V6-2.7L (2008)
NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.
1. Install the four mode door levers (1, 2, 3 and 4) onto the right side of the air distribution housing (5) Make sure the lever retaining tabs are fully
engaged to the housing.
NOTE: Properly position the air doors within the air distribution housing by first aligning the four mode door levers to the scribe lines located
on the right outer side of the air distribution housing. Then, install the air doors onto the mode door levers with the UP mark on each air door
facing toward the top of the housing.
NOTE: If a seal on an air door is deformed or damaged, the air door must be replaced.
2. Align the four mode door levers to the scribe lines on the right outer side of the air distribution housing (5) and install the air door(s) (1, 2, 3 and
4) onto the mode door levers with the UP mark on each air door facing toward the top of the housing.
