Avenger V6-2.7L (2008)
3. Rear - On each side of the vehicle, measure the distance (2) from the flat surface below the rear toe adjustment cam bolt (1) to the floor or
alignment rack/lift runway surface. It may be necessary to measure to the bottom of a straight edge (3), placed from lift runway to runway, to get
an accurate measurement.
4. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart. Maximum left-to-right differential
is not to exceed 12.5 mm (0.5 in.).
5. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the
applicable spring with a spring offering a different check load. See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Strut / Shock/Removal
