Avenger V6-2.7L (2008)
Auxiliary Power Outlet: Service and Repair
Center Console Power Outlet
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open the console lid.
3. Using special tool 9857 Power Outlet Remover. Insert the tool with tips against bosses.
4. Pull out the base through mounting ring by gently rocking pliers.
5. Disconnect the base wires.
6. Set base aside and remove base mount ring.
Installation
INSTALLATION
1. Install base mount ring.
2. Connect the electrical connector.
3. Firmly snap base into position inside of the center console.
4. Connect the battery negative cable.
