Avenger V6-2.7L (2008)
EGR Tube: Service and Repair
EGR Tube - Installation
2.7L - Lower Tube
2.7L - LOWER TUBE
1. Install gasket (4) to EGR valve (5).
2. Install lower EGR tube (2) to vehicle.
3. Install lower EGR tube bolts (1) to EGR valve (5). Tighten bolts to 12 Nm (106 in. lbs.).
4. Install lower EGR tube nut (3) to exhaust manifold. Tighten nut to 70 Nm (51.5 ft. lbs.).
2.7L - Upper Tube
2.7L - UPPER TUBE
1. Install new gasket (4) between upper tube (2) and EGR valve (3).
2. Install lower bolts (5) attaching upper tube (2) to EGR valve (3). Tighten bolts to 12 Nm (106 in. lbs.).
NOTE: Install new rubber silicone seals on intake manifold end of EGR tube any time it is removed from the intake manifold.
3. Install new gasket between upper tube (2) and intake manifold.
4. Verify the upper EGR tube seal (1) is positioned correctly on the EGR tube assembly.
