dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Coil - Removal|Page 5358 > < Ignition Coil - Removal|Page 5356
Page 1
background image

Ignition Coil: Service and Repair
Ignition Coil Capacitor

2.7L 1st

2.7L 1st

IGNITION COIL CAPISTOR 2.7L

1. Remove the negative battery cable.
2. Disconnect the electrical connector.
3. Remove nut and capacitor.

2.7L 2nd

2.7L 2nd

The ignition capacitor is located under the intake manifold on the drivers side of the engine.

1. Disconnect and isolate negative battery cable at battery.
2. Remove electrical connector (3).
3. Remove mounting bolt (1) and ignition capacitor (2).

2.7L 1st

Ignition Coil - Removal|Page 5358 > < Ignition Coil - Removal|Page 5356