Avenger V6-2.7L (2008)
Air Bag: Service and Repair
Side Curtain Airbag - Removal
REMOVAL
1. Disconnect and isolate the battery negative remote cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this
may result in serious or fatal injury.
2. Lower or remove the Headliner to gain enough access to the curtain airbag See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Headliner - Removal.
3. Disconnect the squib connector (2) from the rear of the inflator (1).
4. Unclip the front and rear tether on the A-pillar and C-pillar.
5. Remove the seven nuts (1 and 4) retaining the curtain airbag to the roof line (3).
6. Lift the airbag off the studs (2) and remove the curtain airbag (5) from the vehicle.
