Avenger V6-2.7L (2008)
Seat Occupant Classification Module - Air Bag: Service and Repair
Occupant Restraint Controller (ORC) Module - Installation
Occupant Restraint Controller
OCCUPANT RESTRAINT CONTROLLER
1. Connect the two ORC connectors (4 and 5) and ensure that the connectors are engaged.
2. Position ORC (3) (arrow pointing forward) on the console floor bracket and mounting studs (1).
3. Install the three ORC retaining nuts (2) and tighten to 9 Nm (79.5 in. lbs.).
4. Install the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.
WARNING: Do not connect the battery negative cable Refer to appropriate testing. Serious or fatal injury may result if the system test is
not performed first.
ORC Jumper Harness
ORC JUMPER HARNESS
