Avenger V6-2.7L (2008)
5. Remove the B-pillar trim panel (3) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
6. Feed the seat belt webbing through the upper trim panel.
7. Remove the seat belt upper turning loop bolt.
8. Using a trim stick or equivalent, gently pry the seat belt webbing guide from the B-pillar (6).
9. Remove the lower seat belt retractor mounting bolt (4).
10. Disconnect the two connectors to the retractor (5 - tensioner squib and seat belt switch).
11. Remove seat belt and retractor from vehicle.
Front Seat Belt Retractor - Installation
INSTALLATION
