Avenger V6-2.7L (2008)
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this
may result in serious or fatal injury.
2. Remove the B-pillar lower trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
3. Disconnect the electrical connector (4) from the sensor (2).
4. Remove the screw (3) retaining the B-pillar (1) side impact sensor (2)
5. Remove the sensor (2) from the vehicle.
Side - C-Pillar Sensor
SIDE - C-PILLAR SENSOR
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this
may result in serious or fatal injury.
