Avenger V6-2.7L (2008)
NOTE: Be certain that the anti-rotation pin on the back of the sensor is engaged in the clearance hole on the C-pillar below the sensor
mounting hole.
4. Install screw (4) that secures the sensor (3) to the C-pillar (2). Tighten the screw to 8 Nm (71 in. lbs.).
5. Install the rear quarter panel trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Lower Quarter Trim Panel/Lower
Quarter Trim - Installation.
WARNING: Do not connect the battery negative cable See: Air Bag Systems/Testing and Inspection. Serious or fatal injury may result if
the system test is not performed first.