Avenger V6-2.7L (2008)
Power Seat Switch: Service and Repair
Power Seat Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the seat cushion side shield (3), See: Body and Frame/Seats/Seat Cushion/Service and Repair/Seat Cushion Side Shields - Removal.
3. Disconnect the power seat switch electrical harness connector (4).
4. Using a small flat bladed tool, gently release the four mounting tabs (1) that secure the power seat switch (2) and separate switch from side shield
(3).
