Avenger V6-2.7L (2008)
13. Clean all foreign matter from the threads of the half shaft outer C/V joint.
14. Install the hub nut (1) on the end of the half shaft (2) and snug it.
15. While a helper applies the brakes to keep the hub from rotating, tighten the hub nut (3) to 132 Nm (97 ft. lbs.).
16. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
17. Lower the vehicle.
18. Perform wheel alignment as necessary. See: Alignment/Service and Repair
