Avenger V6-2.7L (2008)
Power Steering Fluid Reservoir: Service and Repair
Power Steering Fluid Reservoir - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions.
1. Remove engine appearance cover.
2. Remove the fasteners securing the coolant recovery bottle to its mounts and move it away from the power steering fluid reservoir. It is not
necessary to disconnect the coolant recovery bottle fluid lines. See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and
Repair/Coolant Recovery Container - Removal
3. Siphon as much fluid as possible from the power steering fluid reservoir (5).
4. Remove hose clamp securing cooler return hose (3) to fluid reservoir fitting. Slide the hose off the end of the reservoir fitting.
5. Remove hose clamp securing pump supply hose (4) to the fluid reservoir fitting. Slide the hose off the end of the reservoir fitting.
6. Remove the reservoir mounting screw (1) used to secure the reservoir in place.
7. Remove the reservoir (5).
8. Remove the plastic shield from the reservoir.
