Avenger V6-2.7L (2008)
NOTE: The gap hider on the upper shroud is attached to the instrument cluster (1) by four retaining tabs (2) along the top and two along the
sides (one each side). These tabs can be easily released by hand in the following step. Do not use a tool that could damage the gap hider.
7. Pull the column outward to the full-extended position.
8. Reach up behind the shroud gap hider (1) and release the two side and four upper tabs retaining the shroud gap hider to the instrument cluster (2).
9. Remove the upper shroud from the column.
Installation
INSTALLATION
1. Position the upper shroud over the steering column.
2. Align the four upper shroud gap hider retaining tabs (2) with the mounting holes in the instrument cluster (1), then push the tabs upward, securing
the shroud.
3. Align the two shroud gap hider side retaining tabs (one each side) with the mounting holes, then push the tabs into place, securing the shroud.
