Avenger V6-2.7L (2008)
16. Position the power steering hose routing clamps (2) on the crossmember. Install and tighten the screws to 8 Nm (71 in. lbs.).
17. Install the fore/aft crossmember (4) and front engine mount through-bolt. See: Suspension/Cross-Member/Front Cross-Member/Service and Repair
18. Install the rear engine mount. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and
Repair/Engine Mount - Installation
19. If equipped, install the engine belly pan.
