Avenger V6-2.7L (2008)
3. Remove the nut (3) and bolt (4) securing the upper control arm (5) to the knuckle.
4. Remove the nut (2) and bolt (1) securing the upper control arm (5) to the crossmember.
5. Remove the upper control arm (5).
Rear Upper Control Arm - Installation
INSTALLATION
1. Position the upper control arm (5) and install the bolt (1) and nut (2) securing the arm to the crossmember. Do not tighten at this time.
2. Install the bolt (4) and nut (3) securing the upper control arm (5) to the knuckle. Do not tighten at this time.
