Avenger V6-2.7L (2008)
10. Remove the wheel speed sensor bracket bolt.
11. Disconnect the ground strap from the muffler.
12. Remove the extension pipe, muffler and tail pipe from the vehicle See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal
and Replacement/Removal - Exhaust System.
13. Remove the stabilizer bar bolts from the rear suspension cross-member See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar - Removal.
14. Remove the lower nut (3) from the rear suspension bracket from the body and rear suspension cross-member.
15. Position a transmission jack under the center of the rear suspension cross-member to support and lower it during removal. Remove the four bolts
attaching the rear suspension cross-member to rear frame rails.
