Avenger V6-2.7L (2008)
8. If equipped with rear disc brakes, slide the disc brake caliper (2) and adapter (3) assembly over brake rotor and brake support plate.
9. If equipped with rear disc brakes, install the two bolts (1) securing disc brake caliper adapter (3) to the brake support plate (4). Tighten the
mounting bolts to 105 Nm (77 ft. lbs.).
10. If equipped, install the routing clips (4) fastening the wheel speed sensor (3) to the trailing link.
11. Install the brake tube in the routing clip (2) on the trailing link.
12. Position the brake flex hose and tube bracket (1) at the trailing link bracket and install the mounting screw (5). Tighten the screw to 23 Nm (17 ft.
lbs.).
