Avenger V6-2.7L (2008)
3. Dismount tire from wheel following tire changer manufacturers instructions while paying special attention to the following to avoid damaging the
pressure sensor:
a. When breaking the tire bead loose from the wheel rim, avoid using the Bead Breaker in the area of the sensor. That includes both front and
rear beads of the tire.
b. When preparing to dismount the tire from the wheel, carefully insert the mounting/dismounting tool at the valve stem ± 10°, then proceed to
dismount the tire from the wheel. Use this process on both the upper and lower tire beads.
4. Remove sensor nut (3) retaining sensor to wheel. While removing nut, hold pressure against rear of metal valve stem to keep valve stem from
pushing rearward, damaging antenna strap.
5. Remove sensor (1) from wheel (2).
