Avenger V6-2.7L (2008)
12. Install tire and wheel assembly (1) See: Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install and tighten wheel
mounting nuts (3) to 135 Nm (100 ft. lbs.).
13. Lower the vehicle.
14. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal before moving it.
Front-Wheel-Drive
FRONT-WHEEL-DRIVE
NOTE: If equipped, make sure the wheel speed sensor mount on the rear of the hub and bearing is directed toward the front of the vehicle.
1. Position the hub and bearing on the brake support plate and knuckle.
2. Install the four bolts (1) securing the hub and bearing (2) to the knuckle. Tighten the bolts to 105 Nm (77 ft. lbs.).