Avenger V6-2.7L (2008)
Wheel Bearing: Service and Repair
Rear Hub / Bearing - Removal
All-Wheel-Drive
ALL-WHEEL-DRIVE
NOTE: Before proceeding, See: Steering and Suspension/Suspension/Service Precautions/Rear Suspension.
1. Raise and support the vehicle. See: Maintenance
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
3. Remove the cotter pin (2) from the hub nut (3) on the end of the axle half shaft.
4. While a helper applies the brakes to keep the hub (1) from rotating, remove the hub nut (3) and washer (4) from the axle half shaft.
5. Tap the end of the half shaft inward, loosening it from the hub and bearing.