Avenger V6-2.7L (2008)
Wiper Motor: Service and Repair
Wiper Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove wiper arms and blades See: Wiper Arm/Service and Repair/Wiper Arms - Removal.
3. Remove the cowl screen See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Removal.
4. Remove the three wiper motor assembly mounting screws (1).
5. Disconnect wire connector (2) at motor and remove assembly.
