Avenger V6-2.7L Flex Fuel (2009)
Trunk / Liftgate Shock / Support: Service and Repair
Gas Prop - Installation
Convertible Decklid
INSTALLATION
1. Using a small flat blade (3) or equivalent, place under the steel clip (2) and pry up away from the pivot ball (4).
2. At the same time you are prying up the steel clip (2), push the prop end (1) onto the pivot ball (4).
3. Repeat 1 and 2 for the other ball and socket end of the gas prop.
4. Close the decklid.
Decklid
INSTALLATION